Q37 Hanger Type Shot Blasting Machine Turnkey

Q37 hook type shot blasting machine is a new type of special non-standard equipment designed and made according to the requirements of users, for large castings, structural parts of the shot blasting cleaning. Through shot blasting cleaning, not only can remove the surface rust, oxidation, sand, etc., but also can reduce the internal stress of the workpiece and improve the fatigue strength of the workpiece.
The equipment mainly consists of cleaning room, bottom hopper, shot blasting machine, opposite door, rail, hook mechanism, hook self rotation, hoist, separator, screw conveyor, maintenance platform ladder, dust removal system, projectile control system, electrical control system, etc. When cleaning the workpiece, the hook lifts the workpiece into the blast room blast area, close the door, start the dust removal system, separator, hoist, spiral conveyor, shot blasting machine and shot gate in turn, can be blast cleaning work, cleaning is complete, lifting out of the cleaning room, unloading, on the pieces.

This equipment equipment is currently in use in Egypt, cleaning the largest workpiece size: diameter × height: Φ1400 × 2300 mm, blast cleaning room chamber for steel plate, steel section welded structure. The side of the blast cleaning room is equipped with a total of 2 blast machine assembly, the arrangement of the blast machine through the computer three-dimensional dynamic simulation, all the arrangements of the angle, position are designed by the computer to determine, and after many practical experience to achieve a more ideal blast effect. Each group of shot blasting machine with the workpiece running direction into a certain angle, can achieve a more ideal cleaning effect, and on the basis of covering all the workpiece to be cleaned, to minimize the empty shot, thus maximizing the utilization of the shot, reduce the wear and tear on the cleaning chamber protection plate. The material used in the hot zone of the blast chamber is wear-resistant shield plate.

Q37 hook type shot blasting machine features.
1. The arrangement of the shot blasting chamber and the shot blasting machine are determined after the computer three-dimensional dynamic blasting simulation
2. Adopt the high blast speed cantilever centrifugal blast machine with Swiss +GF+-DISA technology, which can significantly improve the cleaning efficiency and obtain satisfactory cleaning quality.
3. The separation device adopts the most advanced international full curtain flow curtain type shot slag separator, which can significantly improve the separation effect.
4. The machine design is novel, easy to use and maintain.
5. The hook has automatic lifting and walking function
6. According to the requirements of special workpieces, the hook self-revolving device with wide chain drive, automatic engagement and disengagement and multi-point work is adopted.
7. The machine implements automatic fault detection device and advanced Swiss+GF+ production technology, which makes the machine with advanced structure, reasonable design, reliable operation and high production efficiency.

Qingdao Sanzhuji Equipment Manufacturing Co., Ltd. specializes in the production of Green Sand Molding Line,Self-hardening sand molding line,foundry machines,Sand molding machine,Sand casting equipment,sand mixer,GS high efficiency rotary mixer,Resin sand mixer,no-bake resin sand mixer,Jolt squeeze molding machine/Jolt-squeezing moulding machines,Multi- Piston Moulding Machine/Hydraulic multi-piston moulding machine,sand casting molding machine,sand reclamation equipment，foundry molding machine,flaskless moulding machine,shot blasting machine,dust collector,according to the amount of old sand recovered Carry out plan customization, and provide sand reclamation equipment installation, commissioning, and training. Welcome guests to visit the factory.